 | Service
Excellence In Case Sealers and Carton Sealers Since 1983 |

| |
| Polychem Strapping Machines |  |
Don't See What You
Need? Just Contact Us **Attention:
Are you interested in ordering this product? Please click on "Quick
Quote" and fill out our small form. A customer representative will
then contact you with final pricing with shipping. | |
|
| Polychem PC-100: |
|  |
| | |
| | PC-100
Specifications
Strapping speed: 3 seconds
Minimum package size: 3.5 inch
Maximum package size: to fit tabletop
Maximum tension: 80 lbs. 1/4",3/8",1/2",5/8"
Strap width: 1/4, 3/8, 1/2
Power supply: 120 VAC (60Hz)
Weight: 220 lbs
Features
- "Instant" Heat: Machine is ready to operate in 10 seconds (approx.)
- External Tension Adjustment: Raise or lower strap tension without opening doors or tabletop.
- Safety Reset: When doors or tabletop are opened machine will not run until door or top is closed and main power switch is turned off then on again.
- Weld Cool: Time that heated straps are held together may be increased to ensure best seal under high tension conditions.
- Automatic Motor Stop: If machine sits idle for 30 to 90 seconds (adjustable) the motor stops until next cycle.
- Solid State Electronics: New design printed circuit board.
|
| | **Attention:
Are you interested in ordering this product? Please click on "Quick Quote"
and fill out our small form. A customer representative will then contact you with
final pricing with shipping. |  |
 | |
 |
 |
|
 |
       
Copyright © Case-Sealer.com 1999-2006 All
Rights Reserved Case-Sealer.com is not responsible for typographical or photographic
errors. Prices and specifications are subject to change without notice. |
| |
 |
 |
Are
you looking to spend $10,000 or more on Packaging Equipment, Stretch Film or other
supplies? 
Call our national account representative Gerry Janssen at (920) 422-1472. You
could save your company $1000's of dollars! 
CLICK HERE For Further Details
| |
| | | | | | · | High
speed, fully automatic case erector | | · | User
Friendly and Easy to Adjust | |
Reg. Price $31,500
| | |
| |
| | | | | |
· | Only 60% the cost
of a new unit | | · | All
dispensers are tested and shipped with a new warranty | |
| | |
| |
| | | | | | · | Radius
kick-out plate | | · | Sharp
edge for back dragging | | | | |
| |
| | | | | | · | Radius
kick-out plate | | · | Sharp
edge for back dragging | | | | |
| | | |
| | |